Mobile UVC Sterilizer

Description

  • Clinically proven to eliminate 99.9% of all viruses, bacteria, fungi, mold, yeast, algae, amoebas, and other germs and allergens within seconds of 253.7 nm UVC exposure.

  • Can be programmed and set with touch panel or remote control.

  • A 360° motion sensor deactivates the lamp when it detects movement within 20 feet.

  • Contact-free disinfection reduces the chance of human error and cross-contamination.

  • Arm can be folded out of protective shell and adjusted to 90°, 135°, and 180° angles.

  • Reduces the need to buy and handle corrosive cleaners. (Does not replace soap/water)

MobileUVC-Sterilizer-B.jpg

TECHNICAL SPECIFICATIONS

Model:

Size:

Power:

Voltage:

UV Strength:

UVC Wavelength:

UVC Lamp:

Bonus Features:

Bulb Lifespan:

Weight:

Certifications:

Mobile UVC Sterilizer Unit

41.7”(L) x 13.8”(W) x 14.2”(D)

60W

AC110V

≥117 μW/cm2

253.7 nm

Mercury Quartz

Motion Detector, Remote

≥6,000 hours

19.8 lbs

CE

 
 

TIPS & SAFETY

• To maximize effectiveness, ensure the room to be disinfected is clear of debris

• Take care to avoid direct or prolonged exposure of UVC to skin and eyes

• Keep out of reach of children and pets, should be put away between uses

• Clear area of people, plants and animals

• Can be used near food, tests have not shown any loss in quality or nutrition

• Set on a small stand like a tripod

• If the lamp breaks use a wet paper towel to clean up, and do not inhale

• As distance from a subject is increased, exposure time should be prolonged

INstructions

Ensure that the base is attached, open the side door and lift the lamp arm to your desired angle. Then plug the cord into an outlet and ensure the area is clear of people and debris.

Base Model: Press the ‘ON’ button and set the timer between 0-120 minutes. This model works well to disinfect vacant areas after hours with minimal sta on hand, and should be operated by a professional familiar with this device.

Sensor Model: Press the ‘ON’ button and set the timer between 0-1440 minutes. This model is ideal for more populated areas and can easily be operated by a novice. There is a delay once it is turned on, so it will not activate until the sensor does not detect anyone. If a person or small animal enters the area it will deactivate the unit temporarily until they leave

 

Read the American Journal’s report on the effect of ultraviolet light on infection control.